thic

thic sets the default thickness of the part’s shell elements.

Syntax

thic thickness
  • thickness is a real above zero.

What it does

Every shell element of the part that no th, thi, ssf or ssfi reaches has this thickness on its four corners. The last thic of a part is its default.

When James applies it

After the part’s twenty-one steps, before the th, thi, ssf and ssfi commands are applied.

Rules James adds

  • A shell that no thickness command reaches has thickness zero, and a write that holds such a shell warns with the count, since a solver refuses a zero thickness.
  • thic in a part with no shell has no effect and prints nothing.

Diagnostics

  • E1400: the thickness is missing or is not a positive number.
  • E0412: thic outside a part.

Example

The script tests/corpus/224-thic-th-cylinder-p415/input.tg, which make test runs:

c thic's example, Vol. 1, p. 415: a cylindrical shell with three thicknesses
cylinder -1;1 4 7;1 4 7;
1 0 45 90 1 2 3
thic .2
th 1 1 1 1 2 2 .1
th 1 2 2 1 3 3 .3
endpart

A cylindrical shell of 36 elements at one radius: 18 keep the default 0.2, 9 get 0.1 and 9 get 0.3 from the two th rows.

See also

  • th, thi: the thickness of a region’s shells.
  • ssf: a thickness measured between two surfaces.

James 0.8.0.

This site uses Just the Docs, a documentation theme for Jekyll.